ReliOn MICRO User Instruction page 31

Step 3: Obtain a blood drop
(see pages 27–28). Apply
blood to the end of the test
strip. Capillary action will pull
the blood into the test strip.
The meter will beep when it
detects that blood has been
applied. The meter will begin
to count down. Do not add
blood on top of the test strip,
as you may receive an inaccurate result.
Important
• E nsure that enough blood is applied to fill the check
window and it turns red
• W hen the check window is filled with blood and a
beep sounds, remove the tip of the test strip from
your finger
• If there is not enough blood, 'E-7' or 'Lo' will
be displayed
Filled
Filled
Not Filled
31
No