Huawei CX600-X1-M Series Hardware Description page 95

HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
Interface
Name
CLK clock
interface
RS485 interface RJ45
l
Table 3-27
Table 3-27 Attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45 interface
Attribute
Connector type
Working mode
Standard
compliance
Cable
specification
Table 3-28
Table 3-28 Attributes of the console interface
Attribute
Connector type
Working mode
Electrical
characteristics
Baud rate
Data equipment
type
Cable
specification
Table 3-29
Issue 03 (2014-04-30)
Interface Type
RJ45
Attributes of the interfaces on the MPU
lists the 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes.
Description
RJ45
Half-duplex or full-duplex mode
IEEE 802.3-2002
Super category 5 Shielded Twisted Pair (STP) cables recommended in
the case of 1000 Mbit/s
lists the console interface attributes.
Description
RJ45
Duplex Universal Asynchronous Receiver/Transmitter (UART)
RS-232
The default value is 9600 bit/s. The value can be configured.
Data Circuit-terminating Equipment (DCE)
8-core shielded cable
lists the AUX interface attributes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 CX600-X2-M16 Hardware Description
Description
One RJ45 interfaces. It is used to input one
channel or output one channel 2-Mbit/s clock
signals, or one channel 2-MHz clock signals.
Used to connect to the monitoring interface
on the external AC power supply module
85