Huawei CX600-X1-M Series Hardware Description page 120

HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
Panel Description
Table 4-34
Interface Card(PIC) .
Table 4-34 Description of the indicators on the 4-Port Channelized STM-1c POS-SFP Physical
Interface Card(PIC)
Indicator
STAT
LINK/ACT
(green)
Interface Attributes
Table 4-35
Interface Card(PIC).
Table 4-35 Interface attributes of the 4-Port Channelized STM-1c POS-SFP Physical Interface
Card(PIC)
Attribute
Connector type
Optical interface
attribute
Working mode
Link protocol
Network protocols IP
Issue 03 (2014-04-30)
describes the indicators on the4-Port Channelized STM-1c POS-SFP Physical
Description
If the indicator is steady green, it indicates that the 4-Port Channelized
STM-1c POS-SFP Physical Interface Card(PIC) works normally.
If the indicator is off, it indicates that the 4-Port Channelized STM-1c
POS-SFP Physical Interface Card(PIC) is not powered on or fails to be
registered.
If the indicator is steady red, it indicates that the hardware of the 4-Port
Channelized STM-1c POS-SFP Physical Interface Card(PIC)is faulty.
If the indicator is steady yellow, it indicates that logic is not loaded to
the 4-Port Channelized STM-1c POS-SFP Physical Interface Card
(PIC).
If the indicator is steady on, it indicates that the link is normal.
If the indicator blinks, it indicates that data is being transmitted.
If the indicator is off, it indicates that the link is Down.
lists the interface attributes of the 4-Port Channelized STM-1c POS-SFP Physical
Description
LC/PC
Determined by the selected SFP optical module (for attributes of the SFP
optical module, see
Full duplex
ML-PPP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 4-36)
4 Boards
110