Huawei CX600-X1-M Series Hardware Description page 66

HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
Indicator/
Button
ACT indicator
ETH LINK
indicator
ETH ACT
indicator
RESET button
Table 2-24 Interfaces on the MPU
Interface
Name
ETH interface
(10M/100M/
1000M Base-
TX auto-
sensing)
Console
interface
AUX interface
NOTE
User login by
using AUX
interfaces is not
supported at
present.This
interface is used
for reservation
expansion.
TOD date
interface
CLK clock
interface
RS485 interface RJ45
Issue 03 (2014-04-30)
Description
If the indicator is steady green, the MPU functions as the master MPU.
If the indicator is off, the MPU functions as the slave MPU or is not
registered.
If the indicator is steady green, the ETH link is Up.
If the indicator is off, the ETH link is Down.
If the indicator blinks yellow, data is being transmitted.
If the indicator is off, no data is being transmitted.
The button is used for resetting the MPU. Press the RESET button to
reset the MPU.
Interface Type
RJ45
RJ45
RJ45
RJ45
RJ45
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 CX600-X2-M8 Hardware Description
Description
One ETH interface, for system maintenance
One console interface, used to connect to the
console for on-site configuration
One AUX interface, used to connect to the
modem for remote maintenance through a
dial-up connection
Input or output 1PPS and TOD clock signals
from one channel, and input and output DCLS
from one channel
One RJ45 interfaces. It is used to input one
channel or output one channel 2-Mbit/s clock
signals, or one channel 2-MHz clock signals.
Used to connect to the monitoring interface
on the external AC power supply module
56