Huawei CX600-X1-M Series Hardware Description page 136

HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
The environment monitoring device collects the environment monitoring information and
outputs the information to the device through the ALMI interface. If any exception occurs in the
working environment of the device, the device generates an alarm accordingly and reports the
alarm to the NMS for real-time monitoring and management. Users can run a command to
configure which channel (1 to 4 channels) and which object (temperature, voltage, current,
smoke, and cabinet door) to be monitored. The device then determines whether to report the
associated alarm to the NMS based on the configuration performed by users.
l
l
l
Table 4-60 Description of the interfaces on the Auxiliary Flexible Interface Card with 4-Port
100Base-RJ45(FIC, Supporting 1588v2)
Interface
F1
PHONE
ALMO
ALMI
FE0-FE3
Figure 4-12
RJ45(FIC, Supporting 1588v2).
Figure 4-12 Appearance of the Auxiliary Flexible Interface Card with 4-Port 100Base-RJ45
(FIC, Supporting 1588v2)
Issue 03 (2014-04-30)
Auxiliary interface module
– Provides 4-channel alarm input interfaces.
Control drive module
– Detects the system status through the management and control bus.
– Processes alarm signals, orderwire signals, and transparent data signals.
– Supports hot swapping.
Power module
– Inputs 2-channel -48 V/-60 V DC power.
– Supplies 3.3 V or 1.2 V power.
shows the appearance of the Auxiliary Flexible Interface Card with 4-Port 100Base-
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Type
RJ-45
RJ-45
RJ-45
RJ-45
RJ-45
4 Boards
Description
Reserved
Reserved
Reserved
Interface that inputs four
channels of alarm signals
Interfaces that input and
output FE electrical signals
126