Huawei CX600-X1-M Series Hardware Description page 133

HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
Panel Description
Table 4-55
Card(FIC).
Table 4-55 Indicators on the 4-Port OC-3c/STM-1c POS-SFP Physical Interface Card(FIC)
Indicator
STAT
LINK/ACT
(green)
Interface attributes
Table 4-56
Card(FIC).
Table 4-56 Interface attributes of the 4-Port OC-3c/STM-1c POS-SFP Physical Interface Card
(FIC)
Attribute
Connector type
Interface attribute
Working mode
Link protocol
Supported
network protocol
Issue 03 (2014-04-30)
describes the indicators on the 4-Port OC-3c/STM-1c POS-SFP Physical Interface
Description
If the indicator is steady green, the 4-Port OC-3c/STM-1c POS-SFP
Physical Interface Card(FIC) is working properly.
If the indicator is steady off, the 4-Port OC-3c/STM-1c POS-SFP
Physical Interface Card(FIC) does not register or is powered off.
If the indicator is steady red, the 4-Port OC-3c/STM-1c POS-SFP
Physical Interface Card(FIC) has hardware faults.
If the indicator is steady yellow, no logic is loaded to the 4-Port OC-3c/
STM-1c POS-SFP Physical Interface Card(FIC).
If the indicator is steady on, the link is working properly.
If the indicator blinks, data is being transmitted.
If the indicator is steady off, the link is not working properly.
lists the interface attributes of the 4-Port OC-3c/STM-1c POS-SFP Physical Interface
Description
LC/PC
Determined by the selected SFP optical module
Full-duplex
PPP, HDLC
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Boards
123