Usage - MAGIC FX CO2 JET Manual

11. USAGE

For using the CO2 Jet take the following steps:
1.
TIP:
Gives you suggestions and advice regarding easier or more
convenient ways to carry out certain tasks.
CAUTION:
The machine can be damaged, if you do not follow these procedures
carefully.
DANGER WARNING:
The MAGICFX® CO2 Jet may only be installed by adults and
authorised persons.
The CO2 Jet may only be operated if all parts are completely and
correctly installed/connected.
To operate the CO2 Jet you press the
switch on and off. As soon as you press
the switch the magnetic valve will
immediately open and a white smoke
plume will exit from the CO2 Jet.
When you press the switch again to the
off position the valve will immediately
close.
Never switch for more than 3 seconds.
This way you prevent dry ice from
forming on the blow pipe and you will not
cause an accumulation of CO2 in the
room.
The CO2 Jet can be operated by means
of DMX. To this end use a DMX FX
Switchpack.
Ensure that you always have the
CO2 Jet in clear sight.
Version 1.0
Page 14