Chapter 2: Developer Board and Interfaces Description
Antenna
An antenna (internal or external) must be connected to the Developer Board for adequate GSM
reception. You must connect the G24 to either the on-board internal antenna or to an external
antenna.
Two RF connectors on the right side of the Developer Board, labeled INT ANT and EXT ANT ,
are used for setting up the antenna
(Figure
2-12).
Figure 2-12: Antenna Connectors (external)
On the inside of the Developer Board, the EXT ANT connector is connected to the G24 and the
INT ANT
is connected to the on-board internal antenna.
April 1, 2006
Developer's Kit
21