Antenna Connectors (Internal) - Motorola G24 Developer's Manual

Configuration
To Connect to the Internal Antenna
•
Connect the EXT ANT and INT ANT connectors with the additional RF cable supplied in the
Developer's Kit
Note:
Figure 2-13: Antenna Connectors (internal)
To Connect to an External Antenna
1. Disconnect the external RF cable from the EXT ANT connector.
2. Connect an external antenna or antenna application to the EXT ANT connector
(Figure
The connection cable is not included.
22
(Figure 2-13).
This is the Developer Board's default configuration. The board arrives with the EXT ANT
and INT ANT already connected.
2-13).
Developer's Kit April 1, 2006