Vent-Axia ACM100 B Installation And Wiring Instructions

Vent-Axia ACM100 B Installation And Wiring Instructions

In-line mixed flow fans 220-240v 50hz

Advertisement

ACM In-Line
MIXED FLOW FANS
Installation and Wiring Instructions
220-240V~50Hz
PLEASE READ INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS.
PLEASE SAVE THESE INSTRUCTIONS
Stock Ref. N°
ACM100 B
17104010D
ACM100 T
17104020F
ACM125 B
17105010D
ACM125 T
17105020C
ACM150 B
17106010C
ACM150 T
17106020D
ACM160 B
17107010B
ACM160 T
17107020B
ACM200 B
17108010C
ACM200 T
17108020B
IP44

Advertisement

Table of Contents
loading

Summary of Contents for Vent-Axia ACM100 B

  • Page 1 ACM In-Line MIXED FLOW FANS Installation and Wiring Instructions Stock Ref. N° ACM100 B 17104010D ACM100 T 17104020F ACM125 B 17105010D ACM125 T 17105020C ACM150 B 17106010C ACM150 T 17106020D ACM160 B 17107010B ACM160 T 17107020B ACM200 B 17108010C ACM200 T...
  • Page 2: Safety And Guidance Notes

    C.Ensure that the mains supply (Voltage, Frequency, and Phase) complies with the rating label. D.The Fan should only be used in conjunction with the appropriate Vent-Axia products. E. It is recommended that the connection to the fan connecter terminals is made with flexible cable.
  • Page 3: Installation

    H.Where ducted Fans are used to handle moisture-laden air, a condensation trap should be fitted. Horizontal ducts should be arranged to slope slightly downwards away from the Fan. I. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Page 4 WIRING. WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER SUPPLY DURING THE INSTALLATION / OR MAINTENANCE. THE ACM FANS ARE DOUBLE INSULATED AND CARRY A MARK. THERE ARE NO EARTH TERMINALS AND THESE FANS MUST NOT BE EARTHED. 1.
  • Page 5: Overheating Protection

    Speed Adjustment The fan has three speeds which are selectable by changing the position of the jumper. The fan is factory set to Setting 3 - High speed. To change the speed setting, pull the jumper off the header pins and place back onto the desired position, see Fig14.
  • Page 6: Product Fiche

    PRODUCT FICHE For Residential Ventilation Units (Complying Commission Delegated Regulation (EU) No 1254/2014) Basic Models: Name: Vent‐Axia  Vent‐Axia  Vent‐Axia  Vent‐Axia  Vent‐Axia  ACM 100 ‐  ACM 125 ‐  ACM150 ‐  ACM160 ‐  ACM200 ‐  Model ID (Stock Ref.) : 17104010D 17105010D 17106010C 17107010B 17108010C Declared as: RVU or NRVU/UVU or BVU NRVU/UVU NRVU/UVU NRVU/UVU NRVU/UVU NRVU/UVU Speed Drive Multi Speed Multi Speed Multi Speed Multi Speed...
  • Page 7 PRODUCT FICHE For Residential Ventilation Units (Complying Commission Delegated Regulation (EU) No 1254/2014) - Continued Timer Models: Name: Vent‐Axia  Vent‐Axia  Vent‐Axia  Vent‐Axia  Vent‐Axia  ACM 100T ‐  ACM 125T ‐  ACM150T ‐  ACM160T ‐  ACM200T ‐  Model ID (Stock Ref.) : 17104020F   17105020C 17106020D 17107020B 17108020B Declared as: RVU or NRVU/UVU or BVU NRVU/UVU NRVU/UVU NRVU/UVU NRVU/UVU NRVU/UVU Speed Drive Multi Speed Multi Speed...
  • Page 8 Vent-Axia guarantees its products for two years from date of purchase against faulty material or workmanship. In the event of any part being found to be defective, the product will be repaired, or at the Company’s option replaced, without charge, provided that the product:- ...

This manual is also suitable for:

Acm100 tAcm125 bAcm125 tAcm150 bAcm150 tAcm160 b ... Show all

Table of Contents