Table of Contents
Advertisement
H - I - J
PROGRAMMING (operating and controlling terminal)
• Programming procedure
▪ Changing from display mode to programming mode
(Escape)
▪ Moving between the menu items
▪ Starting parameter setting
(Enter)
▪ Parameter setting
▪ Repeated push: save parameter value (until the cursor blinks)
(Escape)
or
▪ Repeated push: exit parameter setting mode without saving (until the cursor blinks)
(Enter)
• Quick menu
Submenu
In default setting the time needed to reach fmax
Parameter - 1 -
starting from 0 Hz (in control mode).
2-1-1
control Tup
In default setting the time needed to reach
Parameter - 2 -
f = 0 Hz starting from fmax (in control mode).
3-1-1
control Tdown
The durably permitted motor current.
Parameter - 3 -
6-4
motor In
Maximum output frequency.
Parameter - 4 -
8-1
* default setting is 100 Hz for V3D frequency converters
f maximum
without operating terminal
Minimum output frequency.
Parameter - 5 -
8-2
f minimum
Starting voltage given to the motor at standing
Parameter - 6 -
start.
7-2-1
U boost
Allows access to the whole menu system for the
Parameter - 7 -
controlling terminal.
10-14
After switching on/off automatically returns to
active menu
handling the quick menu.
DRIVING TECHNOLOGY SUPPLEMENTS
• 4x16 character display
FREQUENCY CONVERTERS INSTRUCTION MANUAL
Description, further submenus
▪ Displays the display of the programming terminal.
▪ The display can operate together with the terminal, since it only
▪ The display can be used in built-in form (VHD) or as an
Value, range
0,05 - 3276,7
0,05 - 3276,7
0,5 - dep. on type Depending on
0,1 - 1050,0
0,1 - 1000,0
0,5 - dep. on type Depending on
quick
all
receives data and does not answer through the serial line.
externally mounted unit (e.g. to the door of the control cabinet).
- 19 -
0,55 ÷ 200 kW
Default setting
Unit
Depending on
s
type
Depending on
s
type
A
type
50,0 *
Hz
1,0
Hz
V
type
quick
Hide quick links:
Advertisement
Table of Contents
