Jumper Settings; High Voltage Terminal Block - Procon V3D Series Instruction Manual

H - I - J

• Jumper settings

1 2 3 4 5 6 7 8
A1P, A1N Setting the analogue input 1
DIF1 Setting the analogue input 1
A2P, A2N Setting the analogue input 2
DIF2 Setting the analogue input 2
AK1 Setting the analogue output 1
AK2 Setting the analogue output 2
KOZOS1
Setting the digital input 1-4
(K1)
KOZOS2
Setting the digital input 5-6
(K2)
KOZOS3
Setting the digital input 7-8 (option)
(K3)
CAN1 CAN1 line termination (200Ω) (option)
CAN2 CAN2 line termination (200Ω) (option)
RS1 Terminal serial line termination (200Ω) (option)
RS2 System serial line termination (200Ω) (option)

• High voltage terminal block

U V
MOTOR
Ventilator terminal block (3 x 400 V AC, switched together with the cooling ventilators of the frequency converter).
Available for connecting external cooling ventilator (e.g. for cooling the control cabinet), for models VHD 45 to 250
(option)
At models VHD 90 to 250, PE will be connected to a grounding screw.
FREQUENCY CONVERTERS INSTRUCTION MANUAL
VLD / VHD frequency converter
1 2 3 4 5 6
W PE
R BRAKE
VLD / VHD frequency converter
1 2
factory settings
0÷10V
Normal
(- point: GND/A)
0÷10V
Normal
(- point: GND/A)
0÷10V
0÷10V
NPN logic
NPN logic
NPN logic
Not terminated
Not terminated
Not terminated
Not terminated
FAN
- 14 -
0,55 ÷ 200 kW
1 2 3 4 5 6 7
(0)4÷20mA
Differential
(0)4÷20mA
Differential
(0)4÷20mA
(0)4÷20mA
PNP logic
PNP logic
PNP logic
Terminated
Terminated
Terminated
Terminated
L1 L2 L3 PE
LINE
mixed
setting is
allowed