Jumper Settings; Connections Of The Incremental Rotation Speed Encoder (Ire) And Thermal Protection Of The Motor - Procon V3D Series Instruction Manual

H - I - J

• Jumper settings

1
AK1 Setting the analogue output 1 (option)
AK2 Setting the analogue output 2 (option)
A1 Setting the analogue input 1
A2 Setting the analogue input 2
Setting the digital input 1÷4
K1
Setting the digital input 5÷6 (option)
K2
CAN1 CAN line termination (200 Ω) (option)
Terminal serial line termination (200 Ω) (option)
RS1
System serial line termination (200 Ω) (option)
RS2
• Connections of the incremental rotation speed encoder (IRE) (optional) and thermal protection of
the motor
1
The signal device can be NPN open collector type, TTL push-pull type or an output with an output voltage of 5 to 24 V.
Independently of the signal transmitter input, the further digital inputs can be operated with both negative and
positive logic circuitry.
The input selected for the connection of the PTC or the thermal contact has to be provided with "External error",
"opening".
FREQUENCY CONVERTERS INSTRUCTION MANUAL
V3D frequency converter
2 3 4 1 2 3 4
V3D frequency converter
SA SD
2 3 4 1 2 3
PTC or
thermal
contact
1 2
factory settings
0÷10 V
0÷10 V
0÷10 V
0÷10 V
NPN logic
NPN logic
Not terminated
Not terminated
Not terminated
ST CST CSR
4 5 6 1 2
IRE
- 11 -
0,55 ÷ 200 kW
1 2
(0) 4÷20 mA
(0) 4÷20 mA
(0) 4÷20 mA
(0) 4÷20 mA
mixed
PNP logic
setting is
allowed
PNP logic
Terminated
Terminated
Terminated
SR
1 2