Table of Contents
Advertisement
TRANSPORTATION
Refer to Figure 12, 13
WARNING
Risk of unsafe operation. Ensure proper footing and use
caution when rolling the miter saw stand to prevent tipping
or loss of balance.
• See to Raise and Lower the Stand paragraph to place
the stand in the Storage/Transport position. Make sure
the locking knobs are tightened before transporting
the stand.
• To move the stand, use handle to lift and tilt the miter
saw stand onto the wheels. Move miter saw stand
as shown.
• Holding the handle, carefully lower the stand to
the ground.
• The stand may be stored in the vertical or
horizontal position.
Figure 12
GENERAL MAINTENANCE
WARNING
When servicing, use only identical replacement parts. Use
of any other parts may create a hazard or cause product
damage. To ensure safety and reliability, all repairs
should be performed by a qualified service technician.
NOTE: Storing the stand in the vertical position with the
saw attached is a tipping hazard.
Figure 13
MAINTENANCE
WARNING
Keep the miter saw stand dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum based products
or any strong solvent to clean the miter saw stand .
Chemicals can damage, weaken or destroy plastic which
may result in serious personal injury
5
5
5
Advertisement
Table of Contents
