Oxy Heli 5 Instruction Manual page 8

FROM OUR TEST HERE OUR ELECTRONICS SUGGESTIONS:
FROM OUR TEST HERE OUR ELECTRONICS SUGGESTIONS:
CYCLIC SERVO: (Standard Kit) : Standard HELI Size Servo– With Optional Mini Servo Bracket: Mini HELI Size Servo.
RUDDER SERVO: Standard or Mini HELI Size Servo, narrow pulse and fast throw – (Suggested Specific Rudder Servos)
BATTERY: Hard to list here all the option OXY 5 gives, however if 6S from 3500 up 5500 and if 12S from 2500 up 4000. For more information about maximum battery size, please check
User Manual Page 2.
ESC: 100 to 150A
MOTOR: 4015, 4020, 4025 , 4035, 4225 - 500 / 1200 KV depending on your Battery Set-Up.
FBL System: The OXY 5 is designed around the Ikon / Brain and Neo V-Bar Systems. Many other FBL systems can be used, depending on your personal choice. Boom Clamp Bottom
Side can accept any of the current FBL available.
MAIN BLADE: OXY 5 can spin 500 up to 575mm Main Blade, 4mm Screw 10 or 12mm Root.
TAIL BLADE: OXY 5 can spin 85 up to 105mm Tail Blade, 3mm Screw 4mm Root.
OUR PILOTS STANDARD SET-UP
Name: Mark Alswager
Country: USA
Level: Advanced
Battery: 6s 5000mah
Esc: Kontronik jive pro 120hv
Motor: Xnova 4020 lightning 1200kv – A – 6mm
Pinion: 12T
Tail Pulley: 19T
Cyclic servos: MKS hbl599/hbl575
Tail servo:mks X8 hbl880
Fbl: Vbar Neo
Main Blade: VTX 557
Tail Blade: Rotortech 93
Headspeed: 2450-2550
page 8
Chapter 5: Pinion Selection & RPM