Chapter 18: Adjustment Servo With Leveler - Oxy Heli 5 Instruction Manual

Before Fly:
Now complete the setup of your FBL system. In the Accessories Bag you will find an Oxy 5 Swash Plate Leveler.
This Tool is designed to fit under the Swash Plate without disassembly any parts. This simple tool will both level the swash and give
the Zero Pitch Position.
Starting gyro gain: The Oxy 5 was designed around famous FBL Systems (IKON / Brain / mini V-Bar), and we suggest you start with
the following standard set up and adjust after test flying.
Cyclic Set Up:
Use suggested settings for 550 Helicopters and adjust after test flights.
See our table on page 6 for RPM and Pitch Settings. Cyclic Max pitch should be +/- 10.5 deg.
Tail Set Up:
Use the suggested settings for 550 Helicopters BUT start with a LOWER Tail Gain ( Increase after test per need )
IKON / Brain = 20%
Mini V-Bar = 250 Heli suggested gain.
Lift up swash plate
as shown to have
space for inserting Leveler.
page 45
Rotate Leveler as shown

Chapter 18: Adjustment Servo With Leveler

Lower Swash Plate down
untill Swash Plate
touch Leveler as shown.