Oxy Heli 5 Instruction Manual page 12

Tail Belt Crank Support Assembly
( Box3/bag 5 )
loctite 648
OXY0823 - Tail Belt Tensioner Bushing
Tail Belt Crank Support Assembly
( Box3/bag 5 )
OXY0817-OXY5 Tail Bell Crank
Important Note:
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown
page 12
2 x 4x8x3 Flange Bearing
loctite 648
OXY0883 - Belt Pulley
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it's ready to use.
loctite 243
OXY1058 - Tail Bell Crank Pin
Tail Belt Crank Support Assembly
( Box3/bag 5 )
OXY0818 - Tail Bell Crank Support
Tail Belt Crank Support Assembly
( Box3/bag 5 )
Important Note:
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown
3 x M2x6 Hex Cap Screw
loctite 243
OXY0977- Bell Crank Arm
OXY0874-5mm Ball Servo Arm
Chapter 6: Tail Assembly
loctite 648
2 x OXY0818
Tail Bell Crank Support
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it's ready to use.
loctite 243