Oxy Heli 5 Instruction Manual page 10

Vertical Fin Assembly
( Box3/bag 1)
Vertical Fin
Tail Rotor Assembly
(Box3/bag 2)
Tail Grip
2 x 5x10x3 Radial bearing
page 10
loctite 648
6x12x4 Radial Bearing
Bearing Bushing
CA Glue
loctite 243
Important Note:
M2x5 Hex Cap Screw
This part, for tuning reasons,
comes factory pre assembled,
it's ready to use.
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it's ready to use.
add grease
Side Case Assembly
(Box3/bag 1) Side Case
loctite 648
6x12x4 Radial Bearing
Important Note:
Tail Grip will have lateral movement on hub shaft.
This is normal. When Spinning centrippetal force will
hold grip outwards
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown.
Chapter 6: Tail Assembly
loctite 243
CA Glue
Important Note:
Bearing Bushing
This part, for tuning reasons,
comes factory pre assembled,
it's ready to use.
loctite 243