Oxy Heli 5 Instruction Manual page 14

M2.5X6
Hex Cap Screw
Loctite 243
M2.5 Washer
Right Tail Case Assembly
Tail Shaft Assembly
Tail Belt
(Box3/bag 6)
OXY1061
Bushing 6x8.5x3.6
page 14
Tail Bell Crank Suppport Assembly
1 x M3X6
Hex Cap Screw
Loctite 243
3 x M3X6
Hex Cap Screw
OXY0821-OXY5
Tail Case Rod
HTD3M 1698 Timing Belt
Tail Case Insert
Tensioner Assembly
M2.5 Washer
TCEM2.5X30 - M2.5X30
Hex Cap Screw
Tail Boom Assembly
Loctite 243
Fine Adjust Shims Note :
In order to give fine adjustment options,
in the Extra Hardware Bag you will find
extra shims 6X8X0.1.
before install any shim
Start assembly WITHOUT any
read carefully fine
shims. If Tail Shaft has sideways play
adjustment shims note.
more than 0.2mm,
add shims as required, to one side, as shown.
PRO TIPS: For best Tail performances little
Vertilcal Fin Plate side play is recommended.
Chapter 6: Tail Assembly
2 x M3X6
Hex Cap Screw
Loctite 243
Note: all screws in this step
need loctite during assembly.