How To Check Function Key Programs - Furuno FSV-25 Operator's Manual

5. HOW TO CUSTOMIZE THE SONAR
2. Press desired function key for more than one second. The message shown below
appears for five seconds.
3. Press the same function key again, and the message shown below appears.
After registration is completed, the number of the function key appears on the left of
the menu item or timer indication.
5.2.3

How to check function key programs

1. Press the MENU/ESC key to open the main menu.
2. Click [Others].
3. Click [Register].
5-4
<<Function Key Registration>>
Replace the function to new setting.
Press the key again to proceed.
<<Function Key Registration>>
Registration completed.
TX/RX Setting
H1 P1 H2 P1
TX Interval : 9
TX Pulse Length : 9
TX Power : 9
Reverberation : 0
F1
Freq Shift : 0
Hor. Beam Wid : 4
Ver. Beam Wid : 4
Menu item
Register
Display Mode ...
Sel User Prog
Assign User Prog
Assign User Prog-H
Assign User Prog-V
F-KEY List ...
Clear F-KEY Setting ...
H-Scan Range
V-Scan Range
Quit
V P1
Timer indication
Quit
: H/V Individual