Furuno FSV-25 Operator's Manual page 29

3. Push the left button, or if you selected an item with the scrollwheel push the scroll-
wheel. If, for example, you selected [TX/RX Setting] at step 2, the following menu
appears.
Scanning mode tab
This icon means
that this item is
assigned to a
function key (F1).
4. Press the H/V/S key to select the display mode.
• H1, H2 tab: Items for horizontal display setting
• V tab: Items for the vertical display setting
Items which you can not set are shown in gray.
5. Click the item to use.
6. Select the setting.
• (Numeric) Click
crease the value, click
• (Items) Click the item to use.
7. Click [Quit] on the setting box to close the box. If you want to cancel the setting,
click [Cancel].
8. Long-push the MENU/ESC key to close all menus.
You can also close all menus by selecting [Quit] on the active menu and long-
pushing the left button.
You can relocate menu windows. Use the trackball to put the arrow cursor on the
menu title (blue when menu is active), push the left button, drag the window to new
location then release the left button. The position of the menu windows is saved.
Note 1: You can move the menu to a desired location by drag and drop. Left click the
title bar of the active menu then drag and drop to desired location. The location is
stored in memory.
Note 2: In the default setting, the sub menu item [Initial Setting] in the [Others] menu
and some items in the [Initialization] menu are shown in red. This means these items
TX/RX Setting
H1 P1
H2 P1
TX Interval
TX Pulse Length
TX Power
Reverberation
F1
Freq Shift
Hor. Beam Wid
Ver. Beam Wid
Quit
Cancel
9
(0~9)
Numeric window
to increase the value (or roll the scrollwheel upward). To de-
(or roll the cursor scrollwheel downward).
1. OPERATIONAL OVERVIEW
Quit
V P1
User program no. setting
: 9
: 9
: 9
: 0
: 0
: 4
: 4
Quit
Cancel
Normal
Wide
Item window
1-15