Replaying A Function Key; Function Key Fine Tuning - Furuno COLOR SCANNING CSH-23F/24F Operator's Manual

Replaying a Function Key

Function Key Fine Tuning

6-2
USER MENU
Customized settings are registered to FUNCTION keys.
Select key number with
Press END key to return to sub menu.
Figure 6-2 REGISTER menu
5. Press the up or down arrow key in the sub panel 1 to select
the function key to program, then press the MENU key.
6. Press the END key several times to close the menu.
Press function key (F1–F3) desired.
The function key fine tuning keys ([+], [-]) let you fine tune the
items shown in the table on the next page when a function key is
active.
Note: Register function keys beforehand to use this function.
1. Press desired function key. The lamp above the function key
pressed lights.
2. Press the [-] or [+] key as appropriate; the [-] key to lower
the setting to de-emphasize echoes, and the [+] key to raise
the setting to emphasize echoes.
The lamp above the [-] key lights when the setting is -1 to -4,
and the lamp above the [+] key lights when the setting is 1-5.
FUNCTION KEY
key and press MENU key.
1
REGISTER