How To Program The Function Keys Of Remote Controller - Furuno FSV-25 Operator's Manual

5. HOW TO CUSTOMIZE THE SONAR
5. Click [Changeable].
6. Click the function key for which you want to erase its program then push the left
button. Repeat this step for other function keys.
7. Click [Quit] on the setting box to close the setting box.
8. Long-push the MENU/ESC key to close all menus.
5.2.5

How to program the function keys of remote controller

You can program the function keys (F1-F4) on the remote controller (option) to provide
one-touch access to the functions of the keys on the control unit.
The function of the following control unit keys can be assigned to the function keys on
the remote controller.
• V1/S key
• V2 key
• EVENT
• OFF CENTER key
• ESTIMATE 1 (or 2) key
• SHOOT key
• R/B AUDIO key
The default setting of the F1 to F4 key is the same as those on the control unit. To
change a setting, do as follows:
1. Press the F8, F9, and F10 keys in order while pressing the MENU/ESC key to ac-
tivate the program registration mode on the remote controller.
2. Press the MENU/ESC key to close the menu.
3. Press and hold down the applicable key on the control unit and then press a func-
tion key on the remote controller.
When the registration is completed the audio alarm sounds.
4. Operate the function key programmed to confirm functionality.
5. Repeat steps 1 to 4 to program another function key.
5-6
Quit
Cancel
(or ) key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
• DELETE MARK key
• TARGET LOCK key
• FISH key
• AUTO TRAIN key
• DISP MODE key
• H/V/S key
• F1 to F4 key