Display; Start Button; J Button And Settings - Bosch TES 713 Series Operating Instructions Manual

34 34

Display

The display 5 uses symbols to indicate
the selection options, coffee strength and
per-cup quantity, and uses texts to indicate
settings, ongoing processes and messages.
The rotary knob 6 and selection buttons 4
can be used to change settings. The select-
ed setting is highlighted by a frame.
Espresso
 à À Á Å Æ
The status line 5a in the display 5 shows
the name of the type of drink, along with the
strength setting, e.g.
Î . The selection line 5b shows
tity, e.g.
symbols for drink selection.
The arrows in the navigation line 5c indicate
the direction in which more menu levels can
be found.
Please refer to "Displays" for more detailed
information.

Start button

Press the start button 8 to begin drink
preparation or to start a service programme.
Press the start button 8 again during drink
preparation to cut the dispensing process
short.
Robert Bosch Hausgeräte GmbH
TES713_H1.indb 34
ËË Í
5a
5b
5c
55
and per-cup quan-
j
button and settings
j
Use the button 7 to display information
(press briel y) and adjust settings (hold
down for at least 3 seconds).
Displaying information
The following information can be displayed
in the Info menu:
– when should the next service be
completed.
– how many drinks have been dispensed
since the espresso machine was switched
on.
j
● Press the button 7 briel y and navigate
< >
with the and buttons 4.
Info
Descale after
Clean after
No filter
Change filter in
Info
No. of coffees
No. of milk mixes
Amount hot water
*
appears only if the i lter is activated.
j
button 7 again briel y to return
Press the
to drink selection. If no button is pressed for
about 10 seconds the appliance automati-
cally switches back to drink selection mode.
Adjusting settings
See "Menu settings".
en
À
200
À
200
À
200
*
11
15
2l
25.04.2012 18:56:43