Samsung VMR-I HD Series Product Manual page 19

Step 1: Install the base beam. The base beam is the first layer of a screen to ensure
flatness. The base beam can be spliced into the length as requeste by installation
requirements, as shown in Picture 6-1.
Picture 6-1 Stacking Base Beam
Step 2: Install the standing base bar. Align the base bar with the base beam as show
below Picture 6-2
Picture 6-2 Standing Base Bar
Step 3: Install the bracket. Assemble the bracket to the base as shown below, as
shown in Picture 6-3.
19 / 56