Safety Statement; Warning Statement - Samsung VMR-I HD Series Product Manual

needs to be repaired or replaced in time.

2.2 Safety Statement


Please read the instruction carefully.

Please pay attention to the warning signs of the various parts inside and outside
the cabinet.

Please follow the instructions of the product manual.

While cleaning the cabinet, using neutral, make sure they are non-abrasive,
non-corrosive, non-marking materials or reagents.

To prevent the risk of electric shock, ensure that the cabinet is properly grounded
when it is installed.

When performing the screen/hanging screen, the operator should wear anti-static
equipment, and the operation should be careful and careful to prevent the
cabinet from falling.

After the screen installation and connection is completed, do not step on the plug,
socket, power/signal cable.

Please use the accessories/accessories specified by our company.

2.3 Warning Statement


Do not open the internal equipment of the cabinet to reduce the risk of electric
shock. If modules has dead lamps, or the parts of the cabinet are damaged,
professional maintenance personnel should be required for maintenance.

If the power cord in the cabinet is damaged, do not try to repair the power cord.
Please replace the power cord with professional maintenance personnel.

Moisture-proof: The maximum relative humidity of the work should be less than
80%

Waterproof: The VMR-I HD series is an indoor product. It is absolutely forbidden
to use it in an outdoor environment, and it is not allowed to pour liquid into the
inside or outside of the cabinet or the display.

Dustproof: Do not place the display in a dusty environment and clean the surface
of the display regularly.

Dehumidification: Do not adjust the screen directly to the maximum brightness,
but gradually increase it.

Temperature and humidity range:
Working temperature and humidity
range
Storage temperature and
range

Each main power cable can carry a maximum current of 16A. Note that the total
current of the cabinets cascaded in one main power cable should not exceed
16A. Refer to Table 7-1 for the specific quantity.

After the display is idle for a period of time, please turn on the power and input the
-10 ~ 40 ℃/ 10% ~ 80%
-20 ~ 60 ℃/ 10% ~ 90%
humidity
6 / 56