Samsung VMR-I HD Series Product Manual page 11

lock the adjacent cabinets for flat or curve connection;
6. Test button: used during testing;
7. Safety lock----protect the power box;
8. Module----Product display module;
9. Locking lever on the cabinet----Locking the cabinet.
10. Safety rope----Hang the module and protect the module.
11. The left and right locks of the cabinet----with the angle lock, quick connection and
locking the adjacent cabinets for the flat or curve connection;
12. Automatic locking piece----With the locking lever, quick connection and locking the
adjacent cabinet;
Remark:
The module housing in the Picture is applicable to VMR-I-P2.6, VMR-I-P2.9,
VMR-I-P3.9

Main power cable:
Power supply to the display, the wire diameter is 3*2.5mm2, and the maximum load
current is 16A, as shown in Picture 5-2. In the Picture, 1 is the aviation head
connected to the cabinet, and 2 is the mains plug. (We will provide different plugs
according to different countries)

Main signal cable:
Connect the sending box and the display screen. The super five types of network
cables are usually 30m in length and 70m in length, as shown in Picture 5-3.
Picture 5-2 Main Power Supply Cord
11 / 56