Related Manuals for Banner R-Gage Q130RA-AF
Summary of Contents for Banner R-Gage Q130RA-AF
- Page 1 ® R-GAGE Q130RA-AF Sensor Instruction Manual Original Instructions TBD Rev. A 31 October 2018 © Banner Engineering Corp. All rights reserved...
-
Page 2: Table Of Contents
3 Specifications ................................. 6 3.1 Beam Patterns ....................................6 3.2 Dimensions ..................................... 7 4 Windows ..................................8 5 Accessories ..................................9 5.1 Quick Disconnect (QD) Cordsets ..............................9 5.2 Brackets and Enclosures ................................. 9 6 Banner Engineering Corp. Limited Warranty ........................ 10... -
Page 3: Product Description
Protected by US patents. CAUTION: Make No Modifications to this Product Any modifications to this product not expressly approved by Banner Engineering could void the user's authority to operate the product. Contact Banner Engineering for more information. WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. -
Page 4: Features And Indicators
® R-GAGE Q130RA-AF Sensor 1.3 Features and Indicators 1. Power LED: Green (power ON) 2. Signal Strength LED: Red (flashes in proportion to the signal strength) 3. Output LEDs: Yellow (output energized); Red (configuration) Placeholder Figure 1. R-GAGE Features www.bannerengineering.com - Tel: +1.763.544.3164... -
Page 5: Installation Instructions
4 = Black shield (QD cordset) 5 = Gray (Do not connect) Note: Banner recommends that the shield wire (QD cordsets only) be connected to earth ground or dc common. Shielded cordsets are recommended for all QD models. www.bannerengineering.com - Tel: +1.763.544.3164... -
Page 6: Specifications
® R-GAGE Q130RA-AF Sensor 3 Specifications Range Indicators The sensor is able to detect a proper object (see Detectable Objects) Power LED: Green (power ON) from 1 to 24 m (3.3 to 78.7 ft), depending on target Signal Strength LED: Red, flashes in proportion to signal strength. Steady on at 4x excess gain. -
Page 7: Dimensions
® R-GAGE Q130RA-AF Sensor 3.2 Dimensions All measurements are listed in millimeters [inches], unless noted otherwise. Placeholder www.bannerengineering.com - Tel: +1.763.544.3164... -
Page 8: Windows
® R-GAGE Q130RA-AF Sensor 4 Windows The R-GAGE sensor can be placed behind a glass or a plastic window, but the configuration must be tested and the distance from the sensor to the window must be determined and controlled prior to installation. There is typically a 20% signal reduction when the sensor is placed behind a window. -
Page 9: Accessories
® R-GAGE Q130RA-AF Sensor 5 Accessories 5.1 Quick Disconnect (QD) Cordsets 5-Pin Threaded M12/Euro-Style Cordsets—with Shield Model Length Style Dimensions Pinout (Female) MQDEC2-506 1.83 m (6 ft) 44 Typ. MQDEC2-515 4.57 m (15 ft) Straight MQDEC2-530 9.14 m (30 ft) M12 x 1 MQDEC2-550 15.2 m (50 ft) -
Page 10: Banner Engineering Corp. Limited Warranty
6 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.