Engine Seating And Holding Down Bolts; Engine Seating And Arrangement Of Holdingm Down Bolts - Man B&W S50ME-B9.3-TII Project Manual

MAN B&W

Engine Seating and Holding Down Bolts

The latest version of most of the drawings of this
section is available for download at
www.marine.man.eu → 'Two-Stroke' → 'Installa-
tion Drawings'. First choose engine series, then
engine type and select 'Engine seating' in the
general section of the list of drawings available for
download.
Engine seating and arrangement of holding
down bolts
The dimensions of the seating stated in Figs.
5.12.01 and 5.12.02 are for guidance only.
The engine is designed for mounting on epoxy
chocks, EoD: 4 82 102, in which case the under-
side of the bedplate's lower flanges has no taper.
The epoxy types approved by
MAN Diesel & Turbo are:
• 'Chockfast Orange PR 610 TCF' from
ITW Philadelphia Resins Corporation, USA
• 'Durasin' from
Daemmstoff Industrie Korea Ltd
• 'Epocast 36' from
H.A. Springer - Kiel, Germany
• 'EPY' from
Marine Service Jaroszewicz S.C., Poland
• 'Loctite Fixmaster Marine Chocking', Henkel
MAN B&W MC/MCC, ME/ME-C/GI, MEB/-GI engines
MAN Diesel
5.11
Page 1 of 1
198 41 765.11