Storage - Gardenline GL 46 User Manual

Storage

The manufacturer recommends inspecting the cutting blade once a
year to achieve the best possible cutting results.
− Have a qualified professional replace the cutting blade if it is severely worn or
dull.
− Replace the cutting blade after 50 hours of use or after two years, whichever
comes first.
− Replace the cutting blade if it is worn or damaged.
Adjusting the Bowden cable for the wheel drive
1. Turn the adjuster
row until the Bowden cable
ping point has tightened (see Fig. O).
2. Carry out the following steps to check the Bowden cable setting: Start the motor
and try to turn on the wheel drive (see chapters "Starting the motor" and "Using
the wheel drive").
3. Repeat step 1 if the wheel drive does not turn on.
4. If necessary, contact a qualified professional if the Bowden cable cannot be prop-
erly adjusted.
Storage
WARNING!
Risk of injury!
Improper use may result in injury.
− Keep the lawn mower in a place where children or persons who do not
know how to operate the lawn mower cannot access it.
The lawn mower motor has a fuel and oil system suitable for upright storage.
This allows the lawn mower to be tilted backward for storage to reduce the storage
space required. For further information, please also refer to the separate user manual
for the motor.
32
40 between the two hexagonal bolts in the direction of the ar-
3 between the gear selector arm 1 and the stop-