Page 1
User Manual 50752 1200W LAWN EDGER Product Info www.powertoolsupport.com 50752 IM Ed 9...
Page 2
QR codes take you where you want to go quicky and easily Whether you require product information, spare parts or accessories, details on warranties or aftersales service, or if you want to watch a product demonstration video, our QR codes will take you there in no time at all.
Contents Pack Contents / Parts Contents of Carton Intended use of the 1200W Lawn Edger Description of Symbols Safe Operating Practises General Safety Warnings Additional Safety Rules for Lawn Edgers Parts List Assembling the Upper and Lower Shaft Assembling the Auxiliary Handle Setting the Edge Guide Setting the Cutting Depth Cord Routing / Cord Restraint...
Understanding and using these operating instructions Pack contents / parts Congratulations on the purchase of your Gardenline® 1200W Lawn Edger. When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified.
Description of symbols The instruction manual or rating plate on your product may show symbols. These represent important information about the product or instructions on its use. Conforms to relevant standards for electrical safety and electromagnetic compatibility. This edger is double insulated. There are two independent barriers of insulation to protect you from the possibility of electric shock.
DO NOT TOUCH THE CORD BEFORE AFTER SALES SUPPORT DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is e-mail: help@powertoolsupport.com 1800 909 909 damaged or worn. MODEL: №. 50752 • 10/2015 • 50752 (toll free)
b. Never operate the machine while people, especially children, or pets are nearby. c. Wear eye protection and covered shoes at all times while operating the machine. Operation a. Keep supply and extension cords away from the blade / cutting parts. b.
General safety warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The word power tool used in the following warnings and throughout this manual refers to both electrical power tools and also petrol driven power tools.
Page 9
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged or entangled cords increase the risk of electric shock. e.
Page 10
General safety warnings 4. Power tool use and care a. Do not force the power tools. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b.
i) Children should be supervised to ensure that they do not play with the appliance. 5. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
5. Insert the shorter supplied screw through the holes (Fig E), and then use the upper shaft locking knob (8) to hold into position by securing finger tight. (Fig F) AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 50752 • 10/2015 • 50752 (toll free)
(6) over the bolt that has fed through the opposite side. Secure until finger tight. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. 50752 • 10/2015 • 50752...
(12) out away from the blade guard (14) from where it rests in the notch, and move it towards the front wheel and push into the notch to lock it into the up position. (Fig K) AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 50752 • 10/2015 • 50752 (toll free)
2. To stop the edger, release the trigger switch (2). NOTE: Take care when turning the edger “On” that the cutter is in a safe position to operate. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 50752 • 10/2015 • 50752 (toll free)
Do not attempt to edge when the grass or soil is wet or moist; both for electrical safety and to prevent clogging of the blade chamber. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. 50752 • 10/2015 • 50752...
It may be necessary to remove the bulk of this material using a long thin implement (ie. screwdriver). LOOSEN TIGHTEN AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 50752 • 10/2015 • 50752 (toll free)
• Check there is no build up of grass around the spindle. • Check the blade size and cutting edge of the blade. Replace the blade if necessary per the instructions to follow. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. 50752 • 10/2015 • 50752...
Blades should be replaced when they become worn and no longer edge the grass cleanly. Replacement blades are available for purchase from our website www.extrabattery.com.au or by calling 1800 909 909. LOOSEN TIGHTEN AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 50752 • 10/2015 • 50752 (toll free)
Gardenline® 1200W Lawn Edger. Take special care to heed the Cautions and Warnings. Your Gardenline® 1200W Lawn Edger has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this 1200W Lawn Edger, making it easy to maintain and operate.
Customer Support Line - 1800 909 909. For other issues not covered in this chart, please call Customer Service on 1800 909 909. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 50752 • 10/2015 • 50752 (toll free)
• Suggested to clear hard objects from the hard objects. soil. • Problem not found. • Turn off the edger, disconnect and have the edger serviced before next use. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. 50752 • 10/2015 • 50752...
AS/NZS 60335.2.91:2008 + A1:2009 and is approved under the Australian Electrical Approval GMA 103141-EA – 001 For Electromagnetic Compliance the product complies with EN55014-1:2006/+A1:2009 EN55014-2:1997/+A1:2001+A2:2008 AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 50752 • 10/2015 • 50752 (toll free)
Page 27
1200W Lawn Edger Operating instructions and safety notes! AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. 50752 • 10/2015 • 50752...
Page 28
1200W Lawn Edger Understanding and using these operating instructions AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. 50752 • 10/2015 • 50752 (toll free)
Page 29
1200W Lawn Edger Operating instructions and safety notes! AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. 50752 • 10/2015 • 50752...
Page 30
Customer Service Hotline. Made in China Gardenline® is a registered trademark of ALDI Stores DISTRIBUTED BY: ALDI STORES...
Need help?
Do you have a question about the 50752 and is the answer not in the manual?
Questions and answers