Safety Precautions; Maintenance - Soleus Air KFR/KFS Series Installation And Operation Instructions Manual

Do not turn off the power supply cir-
cuit breaker or pull out the unit power
cord during unit operation. This may
cause electrical hazards and/ or a fire.
Power supply wires must be located
in areas where they will not be dam-
aged or cut.
Any type of repairs or maintenance
done to the units must be done by a
professionally licensed contractor.
Any unqualified person should not at-
tempt to repair the units themselves.
Keep the power supply circuit breaker
and power plug free from any type of
debris. If using a power supply cord, be
sure to connect to plug firmly. This will
minimize the risk for electrical shock or
any other type of electrical hazard.
Never insert any type of object into
the outdoor unit fan. Because the fan
rotates at a high speed, this may
cause injury.
Be sure that your hands are not wet
when touching any of the operation
buttons on the indoor unit.
- 1 -
Use 230V/60Hz or 115V/60Hz
power supply only .
Depending on the electrical specifi-
cations of your unit, use only 230V/
60Hz or 115V/60Hz power supply.
Failure to do so may result in electri-
cal problems or hazards.
Be sure that the indoor and outdoor
units are not in operation when discon-
necting the power supply to the unit.
Be sure that the outdoor unit is free
and clear of any debris around the out-
side of the unit. Do not place or lean
any items on the unit.