Intelligent Switchgear - ABB MNS R System Manual

Intelligent switchgear

Thanks to the use of electronic releases with dialogue func-
tion, the air and moulded-case circuit-breakers mounted
inside the switchgear can be controlled and managed by a
supervision system.
To integrate the moulded-case and air circuit-breakers fit-
ted with electronic releases into correct installation man-
agement, ABB SACE supplies SD-View 2000, a "ready to
use" system consisting of software which, when installed
on a personal computer with standard configuration, al-
lows full control of the low voltage electrical installation.
Modbus ® RTU, the recognised standard in the electrical
distribution sector, is supplied as the communication pro-
tocol.
Applications
SD-View 2000 is a system specially studied for application
in those electrical distribution installations which require
efficient management without the need to use complex and
costly systems.
It is able to dialogue and control all the protection units of
the installation and, in particular, low voltage Tmax, Isomax
and Emax series of circuit-breakers in the following con-
figurations:
– Tmax T4 and T5 series of moulded-case circuit-
breakers fitted with PR222DS/PD release
– Isomax S from S4 to S7 series of moulded-case
circuit-breakers fitted with PR212/P release and
PR212/D-M communication unit
– Emax E1 to E6 air circuit-breakers fitted with
PR112/PD or PR113/PD Modbus releases.
Tmax T4 and T5
20
Versions
Emax E1...E6
Isomax S4...S7
ABB SACE