Table of Contents
Advertisement
4. How to retrieve system alarm?
Please refer to page 84 for how to configure system alarm triggers. When the
alarm is triggered, e.g., by digital inputs or motion detection, an alarm
message will prompt on the screen.
Use the > arrow button to browse through the alarm messages.
If the alarm is configured with video recording as the responding action, you
can click on the alarm entry. The Playback window will appear, allowing an
instant playback of the alarm-related footage. You will enter the "Search alarm
results" page even if the alarm does not trigger a recording action.
5. Why live view is unavailable?
The default live view receives a camera's stream #1. If a camera's stream #1 is
configured using MPEG-4 as the video codec, the following message will
prompt.
You can go to the Settings > Camera > Media > Video window to configure the video
codec of stream #1 into H.264. The same will occur if you connect some newer
VIVOTEK 9xxx series H.265 models. You will then need to chanage the CH1 and CH2
Advertisement
Table of Contents
