Table of Contents
Advertisement
2-2-6. Right-click Commands
Left-click to select a camera. Right-click to display the selection menu.
1. Camera information: Click to display camera name, resolution, codec, or
frame rate on the view cell. The information will display on the upper left
corner of a view cell.
2. Auto adaptive stream: Default is enabled. The Auto adaptive stream
automatically polls a video stream of a smaller resolution in order to reduce
the streaming efforts. For example, when a view cell is placed in a 3x3
monitor layout, it may not be necessary to stream the video in its full
resolution. In a full view, the system displays a video in its full resolution.
Due to the size of view cells on your monitor, when in a multi-cell layout, the
system automatically polls the camera for a smaller resolution stream.
The Auto adaptive stream feature can be disabled if you prefer consistent
display resolution.
3. Fit screen with ratio: The NVR server automatically optimizes the display
camera view cells. However, you can still select this option to display the
camera's original aspect ratio: for example, the original video feed can be
4:3. Without the fit screen, every camera's image will be expanded to fill the
view cell.
4. Show tool bar: You can hide the tool bars by deselecting this option.
5. Show timestamp: You can hide the time stamp bars by deselecting this
option.
6. Log in: Log in to enable system configuration.
Advertisement
Table of Contents
