Table of Contents
Advertisement
Below is the PTZ panel that appears with ordinary PTZ cameras
1. PTZ control: Click on the arrow buttons to move towards the direction you
wish to move to.
2. Focus: Click on the Focus near and Focus far buttons to adjust camera
focus.
3. Zoom: Use the Zoom in and Zoom out buttons to adjust the camera's zoom
ratio.
4. Presets: If you configured preset positions, a list of preset positions will
appear.
5. Speed: Adjusts the speed when moving across the field of view.
6. Patrol: If you configured preset positions into a patrolling tour, click on this
button and the camera will proceed with patrolling through the preset points.
This portal appears with a fisheye camera. The PiP and PTZ buttons will then
be disabled for a fisheye camera.
Advertisement
Table of Contents
