Optional: Select Symbologies - Socket 3E User Manual

OPTIONAL: Select Symbologies

The applet makes it quick and convenient to modify which symbologies
you want the scanner to recognize. By default, the scanner is set to
recognize nine of the most common symbologies.
1. Tap on the SDSC scanner icon in the menu bar
applet (visible in the Today screen for Pocket PCs).
In the pop-up menu, select Symbology Selector...
2.
3. In the screen that appears, check the symbologies you wish to enable.
Uncheck those you wish to disable. Tap ok.
Symbologies not supported by the SDSC card will be grayed out.
Trioptic Code 39 must be enabled for Code 128 to work
correctly.
Enabling all possible symbologies will make the decode process
slightly longer.
CHAPTER 2: SETUP FOR POCKET PC 2003
to launch the
15