Snom 300 User Manual page 56

s n o m 3 x 0 V o I P P h o n e s
Automatic update
Note: This method requires an internet connection.
The automatic update is conducted via the phone's web user interface.
Action: Conduct an automatic firmware update
snom 300
Navigate to snom's online knowledge database and read
Copy the
(recommended "
http://provisioning.snom.com/release/update_once.php
Access the phone's web user interface (
Save the change by clicking on Save and start the update by clicking on Reboot
Warning: Any power interruption during the following process will most likely lead
to a flash memory error. As a result the system cannot boot up anymore and the
phone must be sent in for repairing at your own expense.
The phone automatically loads the necessary software from snom's web server
successively. The whole update process may take some time.
The phone will be initialized using the previously stored phone configuration.
Result: The firmware is updated. You can verify the successful update as described in
chapter "Version Check" on page 48.
Phone Configuration
5 0 •
snom 320
link
of the appropriate update method
Update once
to current official firmware release"):
Setup Advanced
link
and paste the
The phone reboots automatically
U s e r M a n u a l
snom 360
this article
below Version 7
Update Setting URL
into that field.
© snom technology AG 2007
E n g l i s h
snom 370
24
carefully.
):