s n o m 3 x 0 V o I P P h o n e s
Phone Initialization
After your phone has been powered up, the system boots up and performs the
following steps:
(1) Hardware Self-Test
hardware self-test
A phone
(2) TFTP Update Screen
The
TFTP Update Screen
phone back to factory values.
snom 300
Warning: Use this option only when the phone is malfunctioning on reboot. All
settings will be lost and the phone is set back to factory values!
For TFTP update:
Press any key: 3
Read the
instructions
(3A) Automatic Phone Initialization
The phone continues the initialization process by loading the last saved configuration.
snom 300
System booting.
Please wait...
Getting Started
1 2 •
is run, all LEDs light up.
allows you to update the firmware along with setting the
snom 320
For TFTP update:
Press any key: 3
5
provided in our online knowledge database
snom 320
System is booting up.
Please wait...
U s e r M a n u a l
snom 360
For TFTP update:
Press any key: 3
snom 360
System is booting up.
Please wait...
© snom technology AG 2007
E n g l i s h
snom 370
For TFTP update. Press any key:
© 2000-2007 snom technology ...
snom 370
System is booting up. Please wait
© 2000-2007 snom technology ...