Denon DN-S3700 Service Manual page 25

5. Checking the operation of the panel (Panel CHK)
(1) Turn the PARAMETERS knob to select "Panel CHK" from the service mode's top menu, then press the PARAMETERS
knob to set the "Panel CHK" mode.
The following appears on the VFD dot display section:
P F C F P
E
F W < B T
Other displays/indicators
Track number display section : "***" (3-digit, pitch fader center value)
Pitch display section
(2) Display of the status and results of the various control elements on the panel surface and external input from the rear side.
PARAMETERS knob → Displays the "P" for the first place of the first row of the VFD dot display section.
EFFECTS knob
Vinyl playback direction selector lever
Pitch FADER
FADER IN
TAP button
(3) Press button to return to the top level of the CD drive check mode.
6. JOG pulse check mode (JOG CHK)
• Displays platter jog disc and turntable rotation pulse input number.
(1) Turn the PARAMETERS knob to select "JOG CHK" from the service mode's top menu, then press the PARAMETERS
knob to set the "JOG CHK" mode.The following appears on the VFD dot display section:
J O G C O U N T < * * * * * >
T T C O U N T < * * * * * >
(***** : Count value)
6.1. Platter jog disc pulse detection (PLATTER JOG)
• When the platter jog disc is turned, displays ">" (clockwise) or "<" (counterclockwise), according to the direction of rotation.
Displays the counter value of the platter jog disc's rotation pulse number at "*****" on the VFD dot display section, within
the range of 0 to 65535. Counts up when turned clockwise, down when turned counterlcockwise.
6.2. Turntable pulse detection (TT)
• When the turntable is turned, displays ">" (clockwise) or "<" (counterclockwise), according to the direction of rotation.
Displays the counter value of the turntable's rotation pulse number at "*****" on the VFD dot display section, within the
range of 0 to 65535. Counts up when turned clockwise, down when turned counterlcockwise.
: "****" (4-digit, pitch slider status)
Toggles the display of the " ■ " for the second place of the first row of the VFD dot display
section between white and black each time the knob is pressed.
Displays the ">" (clockwise turn) for the fourth place of the first row or the "<" (counterclock-
wise turn) for the third place of the first row when the knob is turned, according to the direction
in which the knob is turned.
→ Displays the "E" for the first place of the second row of the VFD dot display section.
Toggles the display of the " ■ " for the second place of the second row of the VFD dot display
section between white and black each time the knob is pressed.
Displays the ">" (clockwise turn) for the fourth place of the second row or the "<" (counter-
clockwise turn) for the third place of the second row when the knob is turned, according to the
direction in which the knob is turned.
→ When "FDW" is selected, "FW< BT" is displayed in the third row of the VFD dot display sec-
tion.
When "BOTH" is selected, "FW >BT" is displayed in the third row of the VFD dot display sec-
tion.
→ The pitch signal's AD conversion value is displayed on the pitch display section.
The center tap value is displayed in three digits on the track number display section.
→ Displays the "FC FP" for the sixth place of the first row of the VFD dot display section.
Displays " ■ " at the right of "FC FP" on the VFD dot display section while the "cue or play"
fade-in signal is being detected.
→ When the TAP button is pressed, toggles between:
All LEDs lit + VFD fully lit → LED DIM lit (two LEDs on the sides of the VFD lit) + VFD fully off →
All LEDs off (for LEDs on the sides of the VFD, remaining two left and right lit) + VFD set to
normal display.
25
DN-S3700