Denon DN-S3700 Service Manual page 21

3.4. Pickup movement (PU Clean)
• Move the pickup lens to any position.
(1) Turn the PARAMETERS knob to select "PU Clean" from the "CD Drive CHK" mode's top menu, then press the PA-
RAMETERS knob to set "PU Clean" mode. The following appears on the VFD dot display section:
P U C l e a n
P U S H B E N D + & -
(2) Press the PITCH BEND button to move the pickup lens. The pickup lens stops moving when the PITCH BEND button
is released.( button: Direction of outer /
(3) Press the button to return to the top level of the CD Drive check mode.
3.5. Remove the disc (Loader Clean)
• Turn the loading motor in the direction of disc ejection.
(1) Turn the PARAMETERS knob to select "Loader Clean" from the "CD Drive CHK" mode's top menu, then press the
PARAMETERS knob to set "Loader Clean" mode. The following appears on the VFD dot display section:
L o a d e r C l e a n
P U S H S E A R C H +
(2) Press the button and turn the loading motor in the direction of disc ejection. The motor stops turning when the
button is released.
(3) Press the button to return to the top level of the CD Drive check mode.
3.6. Error code display (Error Code CHK)
(1) Turn the PARAMETERS knob to select "Error Code CHK" from the "CD Drive CHK" mode's top menu, then press the
PARAMETERS knob to set "Error Code CHK" mode. The following appears on the VFD dot display section:
E r r o r D a t a
X X _ E Y Y Y
(XX:Error logging number, EYYY:Error code, not error:turn off)
(2) Up to 10 errors occurring in the CD mode are stored in the MEMO memory.
※ The errors remain stored in the memory until they are cleared, and once they are cleared up to 10 new errors are
stored.
(3) Turn the PARAMETERS knob to check the error logging data.
When the PARAMETERS knob is pressed, "Error Clear?" is displayed on the second row of the VFD dot display. When
the PARAMETERS knob is pressed again at this time, all the data is cleared. Turn the PARAMETERS knob to cancel.
(4) Error code table
Error code
E204 Focus servo dropped during cuing.
E205 Focus servo dropped during pausing
E206 Focus servo dropped during manual searching or scanning.
E213 Subcode could no longer be read in the cue mode
E214 Subcode could no longer be read in the pause mode.
E215
Focus servo dropped during manual searching or scanning.
button: Direction of inner)
Error contents
21
DN-S3700