Denon DN-S3700 Service Manual page 18

2.3. Audio signal output (Audio OUT)
• The device's built-in 24 bit/44.1 kHz sampling frequency audio signals are played from ADSP.
(1) Turn the PARAMETERS knob to select "Audio OUT" from the "Function CHK" mode's top menu, then press the PA-
RAMETERS knob to set "Audio OUT" mode.
Information on the operations is displayed on the first row of the VFD dot display, information on the output signal on
the second row.
(2) Turn the PARAMETERS knob clockwise and display the signal to be output from q to o on the VFD dot display.
Press the PARAMETERS knob while the signal to be output is displayed to set it. The selected signal is output from
ADSP.
q 1kHz -6dBFS signals are output from the left and right channels.
R e f e r e n c e
1 k H z - 6 d B F S
w 1kHz 0dBFS signals are output from the left and right channels.
M a x L e v e l
1 k H z 0 d B F S
e 20Hz -6dBFS signals are output from the left and right channels.
F r e q . C h a r a .
2 0 k H z - 6 d B F S
r 1kHz -6dBFS signals are output from the left and right channels.
F r e q . C h a r a .
1 k H z - 6 d B F S
t 20kHz -6dBFS signals are output from the left and right channels.
F r e q . C h a r a .
2 0 k H z - 6 d B F S
y 1kHz - ∞ dBFS signals are output from the left and right channels.
I n f i n i t y 0
u 1kHz -6dBFS signals are output from the left and right channels.
R e f e r e n c e
1 k H z - 6 d B F S
i 1kHz -6dBFS signals are output from the left channel.
- ∞ dBFS signals are output from the right channel.
C r o s s T a l k R
L : 1 k H z - 6 d B F S
o 1kHz -6dBFS signals are output from the right channel.
- ∞ dBFS signals are output from the left channel.
C r o s s T a l k L
R : 1 k H z - 6 d B F S
(3) Press the button to return to the top level of the function check mode.
2.4. Audio Mute check (Mute Check)
• Switches the hardware's muting circuit on and off.
• Output a 1 kHz/0 dB audio signal from ADSP for both the left and right channels. (Use the [2.3 Audio signal output] sig-
nal.)
(1) Turn the PARAMETERS knob to select "Mute Check" from the "Function CHK" mode's top menu, then press the PA-
RAMETERS knob to set "Mute Check" mode.
The current muting status is displayed on the VFD dot display.
M u t e C h e c k
O F F
or
M u t e C h e c k
O N
(2) Turn the PARAMETERS knob clockwise to select "ON", counterclockwise to select "OFF" the mute control mode status.
(3) Press the button to return to the top level of the function check mode.
18
DN-S3700