Connect Av Show The Image On Projector Screen - RCA RPJ129 Instruction Manual

Connect HDMI
Refer to the following picture to connect a set top box, a BD/DVD player or a streaming
player to the HDMI input.
1. Turn off the unit before connect HDMI cable.
2. A er connect, press the
/ SOURCE bu on to select HDMI 1 or HDMI 2 and the video from the
3. Press the
connected device will be shown on projector screen.
4. Press the
Important Note:
If there is no sound from the internal speakers when playing media contents from a set top
box, BD/DVD or streaming players connecting to the HDMI input, please check the set top
box or the player's digital audio settings and make sure it is set to "PCM Stereo" mode.
Connect AV
Follow below picture to connect AV cable and device.
1. Turn off the unit before connect AV cable.
2. Use AV cable to connect follow below figure
3. After connect, press the
GREEN
4. Press the
show on projector screen
5. Press the
DC IN
Show The Image On Projector Screen
bu on to turn on unit and power indicator will light GREEN
button to turn off unit power.
HDMI CABLE
VI DE O
US B 1 HD MI 1
US B 2 HD MI 2
VG A
D D C IN
KEYSTONE
Show The Image On Projector Screen
button to turn on unit and power indicator will light
/ SOURCE button to select AV mode and the video of AV device will
button to turn off unit power.
VI DE O
US B 1 HD MI 1
US B 2 HD MI 2
VG A
KEYSTONE
CABLE NOT INCLUDE
HDMI Streaming player (not included)
CABLE NOT INCLUDE
11
Video Player
VIDEO PLAYER