Connect Hdmi Show The Image On Projector Screen; Connect Av Show The Image On Projector Screen - RCA RPJ060 Instruction Manual

Connect HDMI Show The Image On Projector Screen

Refer to the following picture to connect a set top box, a BD/DVD player or a streaming
player to the HDMI input.
1. Turn the unit to standby mode before connect HDMI cable.
2. After connection, press the
3. Press the / SOURCE button, use the
to enter. The video from the connected device will be shown on projector screen.
4. Press the button to turn the unit to standby mode.
HDMI CABLE
VGA
AV IN
IR

Connect AV Show The Image On Projector Screen

Follow below picture to connect AV cable and device.
1. Turn the unit to standby mode before connect AV cable.
2. After connect, press the
3. Press the / SOURCE button, use the
to enter. The video of AV device will show on projector screen
4. Press the button to turn the unit to standby mode.
Cable is not included
VIDEO CABLE
button to turn on unit and
CABLE NOT INCLUDED
DC IN
HDMI 1 HDMI 2 USB
POWER
button to turn on unit and power indicator will light GREEN
LEFT CHANNEL
RIGHT CHANNEL
button to select HDMI and press
Video Player
Important Note:
If there is no sound from the internal speakers when
playing media contents from a set top box, BD/DVD or
streaming players connecting to the HDMI input, please
check the set top box or the player's digital audio
settings and make sure it is set to "PCM Stereo" mode.
button to select AV and press
VGA
IR
11
indicator will light GREEN.
OK
DC IN
AV IN
HDMI 1 HDMI 2 USB
POWER
button
OK
button