Table of Contents
Advertisement
Connect HDMI
Follow below picture to connect HDMI cable and device.
1.
Turn off the unit before connect HDMI cable.
light GREEN
3.
Press the
device will show on projector screen. There are 2 HDMI input, HDMI1 interface
corresponds to HDMI 1 in SOURCE mode , and HDMI2 interface corresponds to
HDMI 2 in SOURCE mode.
4.
Press the
HDMI hd signal input : this interface can be input with HD player
HDMI CABLE
CABLE NOT INCLUDE
Connect AV
Follow below picture to connect AV cable and device.
1.
Turn off the unit before connect AV cable.
2.
Use AV cable to connect follow below figure
3.
After connect, press the
light GREEN
/ SOURCE button to AV mode and the video of AV device
4.
Press the
will show on projector screen
5.
Press the
CABLE NOT INCLUDE
VIDEO CABLE
VIDEO PLAYER
Show The Image On Projector Screen
/ SOURCE
button to turn off unit power.
Show The Image On Projector Screen
button to turn on unit and power indicator will
button to turn off unit power.
LEFT CHANNEL
RIGHT CHANNEL
VIDEO CABLE : YELLOW
AUDIO LEFT CHANNEL : WHITE
AUDIO RIGHT CHANNEL : RED
11
In rare cases, if the projector's speaker has
no sound when playing a DVD movie in a
player connecting to the HDMI input, please
check the player's digital audio settings and
make sure it is set to "Auto" mode or "PCM"
mode.
Advertisement
Table of Contents
