Programme; Starting The Programme; To Change The Drying Time; Adding More Washing - Siemens Extraklasse 610 Operating Instructions Manual

Hide thumbs


Table of Contents


Please select a drying time in accordance with the programme chart (Page 8).
The drying time should be set according to
the type, quantity and dampness of the laun

Starting the programme

Turn the programme selector to the required
drying time.
1. Close the door.
2. Press the On/Off" button.
The indicator lights up.

To change the drying time

Turn the programme selector to the new
drying time.

Adding more washing

This may be done at any time.
1. Press the Door" button.
The drum stops revolving.
2. Add any additional clothes.
3. Close the door.
4. Press the On/Off" button.

"Low Heat" button

Must be pressed for delicate fabrics e.g.
The temperature is reduced, and the drying
time extended.
Removing the laundry / Switching off
the tumble dryer
If installation conditions are incorrect, con
densation water may occasionally form
around the porthole.
Washing which is being taken out of the ma
chine may therefore come into contact with
water droplets, but will dry again within a few
5. Press the Door" button.
6. Clean the filter (page 10).
All manuals and user guides at


Table of Contents

  Also See for Siemens Extraklasse 610

Table of Contents