Basic Operation; Switching On The Appliance; Setting A Programme; Loading Laundry - Siemens WP31G208IN User Manual And Installation Instructions

en operation
¡ Dry woollen items, sports shoes
and soft toys in the wool basket
→ "Wool basket", Page 32
operation
12 Basic operation
operation
12.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Turn the programme selector to a
▶
programme.
12.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 24
If required, adjust the programme
2.
settings.
12.3 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 24
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 27
¡ The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
28
12.4 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 28
Press Start/Pause .
▶
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End" .
Note: If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
12.5 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press Start/Pause .
1.
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→ "Display", Page 18
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start/Pause .
5.
12.6 Cancelling the pro-
gramme
Press Start/Pause .
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 28
12.7 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.