Blaupunkt Q Series Manual page 32

Attributes: The attribute parameter defines when the system should trigger an alarm due to sensor activa-
tion.
The sub-menu Attributes contains the following options depending on the sensor type:
• Burglar: When an accessory set as Burglar is triggered, while the panel is in Arm or Home Arm Mode,
an intruder alarm will be triggered immediately. If the accessory is triggered during Entry or Exit count-
down, the alarm will not be activated immediately.
• Home Omit: When an accessory set as Home Omit is triggered, while the panel is in Arm Mode, an
intruder alarm will be triggered immediately. When an accessory set as Home Omit is triggered, while
the panel is in Home Arm Mode, the alarm will not be triggered
• Home Access: When an accessory set as Home Access is triggered, while the panel is in Home Arm
Mode, an Entry Delay countdown will be triggered according to the programmed Home Entry 1 Delay.
(Please refer to 4.6 Panel Setting to change the Entry Delay period).
The user must disarm the system before the countdown ends or the panel will trigger a burglar alarm.
Disarming the panel within the Entry Delay period will return the system to Disarm Mode and no alarm
will be reported
• Entry 1 / Entry 2: When an accessory set as Entry 1 or Entry 2 is triggered, while the panel is in Arm or
Home Arm Mode, an Entry Delay countdown will be triggered according to the programmed Entry 1
Delay or Entry 2 Delay setting. (Please refer to 4.6 Panel Setting to change the Entry Delay period).
The user must disarm the system before the countdown ends or the panel will trigger a burglar alarm.
Disarming the panel within the Entry Delay period will return the system to Disarm Mode and no alarm
will be reported.
• 24 h: With this attribute, the accessory is permanently armed regardless of the arm mode from the
panel.
• Burglar Outdoor: This attribute its exclusive for the PIR Cameras accessories (IRC-S2 and IRC-P4).
When a PIR Camera detects movement, the detector will take pictures and you will be notified via push
notification, but it will not trigger the siren. This is also called "silent alarm".
• Personal Attack/Silent Panic: These attributes exist only for the remote control accessories. It deter-
mines the function of the panic button.
The attribute Person Attack triggers an alarm immediately.
The silent panic alerts you via push notification but will not trigger the panel siren.
Note: If the panic button on the remote control is triggered, the control panel can no longer be dis-
armed by the same remote control. This must be done with another device or the app.
32
Blaupunkt Competence Centre Home Security