Thermostat And Radiator - Blaupunkt Q Series Manual

2.2.1.3 Thermostat and Radiator

Thermostats as TMST-S1 or Radiators as TRV-S1 will display the current mode (Auto / Cool / Heat) and
temperature under the status column. Additionally,
NOTE:
Radiators don't have auto, cool or away mode, only heat mode
Click on the 3 dots from the right to open and manage the thermostats. Select the operation mode between
Auto, Cool, Heat or Away.
Here the current temperature is shown and with the + and – you can change the desired heat / cool
temperature setpoint.
At the right-hand side, you can choose to switch the Fan between ON and Auto.
To create a schedule, click on Schedule in the bottom right-hand side of the screen.
Here you can create a schedule according to your needs. To do this, click on the settings wheel icon
select the desired day and click on the 3 bars from the right
Select "Add time period". Select a staring time, click "OK" and select the temperature.
It is possible to copy this setting to other days by clicking on "Copy to" and select
the desires days to copy. To save the schedule click on "save" at the bottom.
NOTE:
The radiator TRV-S1 is usually installed at the corner of the room and near the heating pipe. As a result,
it's temperature reading may deviate from room temperature at
Offset function to compensate for
11
cooling and heating
the deviation.
setpoints will be displayed.
is available.
.
the centre of the room. Use the Setpoint
Blaupunkt Competence Centre Home Security
,