2.5 Settings
Click "Setting" on the left menu to open
the settings interface.
To access the settings menu the sys-
tem will ask to input the Master Code.
(Default Master Code 1111).
After entering the Master Code, you
will enter the Device setting sub-menu.
2.5.1 Device Settings
The Device settings menu displays the information and status of all the accessory devices learnt in the Con-
trol Panel. It's possible also to add, edit and remove the existing devices.
If there is any failure on a device (e.g. battery low, tamper open, supervision failure), the device will be
highlighted in red and the error will be displayed under the "Fault" column. Door contacts that are open will
also be highlighted in red and under the "Status" column will display "DC Open".
Blaupunkt Competence Center Home Security
29